UNIFLOW-100 Flow Computer
Short form technical description

The UNIFLOW-100 is a flow computer  (signal processing unit and display) of flow measuring circuits (FMC). The UNIFLOW-100 can be used for measuring different gases, liquids, water steam flowing in closed pipelines under pressure. The flow computer is  capable to measure volume flow, mass flow,  energy flow.
The unit is the third generation of flow computers developed by the Process Control Ltd. The main feature of our new flow computer family is that the UNIFLOW-100 can calculate up to 8 flow measuring circuits. This is an extremely unique feature of the UNIFLOW-100 which can result in rugged measuring systems and the user can save price comparing the solutions with using traditional single measurement loop flow computers.

Why the UNIFLOW-100 is the best choose?
Facts:
* Single unit can measure 8 volume at the same time
* 4 virtual measuring loops can be defined for calculating volume end energy balances      
* No program change needed for the different materials and sensors. The same unit can measure different materials (natural and othe gases, steam, hot water, liqutdes) applying different measuring methods (orifices plates, turbine meters, vortex,  rotametric, induction, ultrasonic and insertion  probes such as accutube, itabor, annubar)
* The unit measures volume (volume flow, massflow, diff. pressure) and correction (P, T, density, composition) signals
* The applied calculations meet the requirement of the living International standards (ISO 5167-1:1995, ISO 5168, AGA Rep. 8, GERG, etc. )
* Less transmitters required if the signal is used in more then one measurement loops.
* Pt100 resistor thermometer inputs eliminates the use of temperature transmitters
* Performs the task of supplying the transmitters
* Provides limit checking and control functions are performed
* Cost of one FMC is less compared to the traditional solutions
* The UNIFLOW-100 can perform approved measurement. The cost of the approval is less in the case of multi-loop applications
* The unit parameters can be set by the operator panel or by a PC via the serial interface
* Historical data storage for 36 days
* RS232 or RS485-RS422 serial ports and the MODBUS protocol gives the possibility to integrate the UNIFLOW-100 flow computers into high or low level process control and/or      information system.
* Warranty for 3 years
* Available a data logging and process visualization SW developed for up to 64 FMCs. This program runs on a PC, all the typical measuring, data logging, visualisation and archiving functions are implemented. The standard program can easily be extended with user defined operator panels or special functions related to the given technology.
* References: More than 1000 unit works in Hungary and in other countries